Program features 103
External control
When the drive is in external control, the commands are given through the standard
I/O terminals (digital and analog inputs) and/or the fieldbus interface. In addition, it is
also possible to set the control panel as the source for the external control.
External control is indicated with REM on the panel display.
The user can connect the control signals to two external control locations, EXT1 or
EXT2. Depending on the user selection, either one is active at a time. This function
operates on a 2 ms time level.
Settings
Diagnostics
Panel key
Additional information
LOC/REM
Selection between local and external control
Parameter
Selection between EXT1 and EXT2
Start, stop, direction source for EXT1/EXT2
Reference source for EXT1/EXT2
Actual signals
Additional information
/
EXT1/EXT2 reference
HVAC control panel
Basic control panel
DIR
MENU
00:00
REM
49.1Hz
49 1 Hz
.
0 5 A
.
10 7 %
.
REM
Hz
OUTPUT
FWD
491
.
Summary of Contents for ACS320 series
