20 Introduction to the manual
Contents of this manual
The manual consists of the following chapters:
•
(page
) gives safety instructions you must follow when installing,
commissioning, operating and servicing the drive.
•
(this chapter, page
) describes applicability, target
audience, purpose and contents of this manual. It also contains a quick
installation and commissioning flowchart.
•
Operation principle and hardware description
(page
) describes the operation
principle, layout, power connections and control interfaces, type designation label
and type designation information in short.
•
(page
) tells how to check the installation site, unpack,
check the delivery and install the drive mechanically.
•
Planning the electrical installation
(page
) tells how to check the compatibility of
the motor and the drive and select cables, protections and cable routing.
•
(page
) tells how to check the insulation of the assembly
and the compatibility with IT (ungrounded) and corner grounded TN systems as
well as connect power cables, control cables and embedded fieldbus.
•
(page
) contains a checklist for checking the mechanical
and electrical installation of the drive.
•
(page
) tells how to start up the drive as well as how to start, stop,
change the direction of the motor rotation and adjust the motor speed through the
I/O interface. In addition, the chapter gives a brief description of each application
macro together with a wiring diagram showing the default control connections. It
also explains how to save a user macro and how to recall it.
•
) gives a brief description of each application macro
together with a wiring diagram showing the default control connections. It also
explains how to save a user macro and how to recall it.
•
(page
) describes program features with lists of related user
settings, actual signals, and fault and alarm messages.
•
(page
) describes actual signals and
parameters. It also lists the default values for the different macros.
•
(page
) tells how the drive can be controlled by external
devices over a communication network using embedded fieldbus
•
(page
) tells how to reset faults and view fault history. It lists all
alarm and fault messages including the possible cause and corrective actions.
•
Maintenance and hardware diagnostics
(page
) contains preventive
maintenance instructions and LED indicator descriptions.
•
(page
) contains technical specifications of the drive, for
example, ratings, sizes and technical requirements as well as provisions for
fulfilling the requirements for CE and other marks.
•
(page
) shows dimension drawings of the drive.
Summary of Contents for ACS320 series
