22 Introduction to the manual
Quick installation and commissioning flowchart
Task
See
Identify the frame size of your drive: R0…R4.
Operation principle and hardware description
:
on page
on page
or in
section
on page
Plan the installation: select the cables, etc.
Check the ambient conditions, ratings and
required cooling air flow.
Planning the electrical installation
on page
Unpack and check the drive.
on page
If the drive will be connected to an IT
(ungrounded) or corner grounded system,
check that the internal EMC filter is not
connected.
Operation principle and hardware description
:
on page
:
compatibility with IT (ungrounded) and corner
on page
Install the drive on a wall or in a cabinet.
on page
Route the cables.
Planning the electrical installation
Check the insulation of the input cable and the
motor and the motor cable.
:
on page
Connect the power cables.
:
Connect the control cables.
:
Check the installation.
on page
Commission the drive.
on page
Summary of Contents for ACS320 series
