4003 Crystal.PoE
Document Number: MAN0038
Issue: 2
Page 1 of 4
Crystal.PoE V4 Manual
(Addendum to Crystal.net Manual)
SAFETY NOTES
Please read this manual carefully before attempting to install, program or operate the Progeny access control
equipment.
This equipment must be installed in line with all relevant regulations and standards.
Make sure that wiring is rated according to fuses and current limits of relevant power supplies.
All connections to this unit must be SELV level. (Safety Extra Low Voltage, BS EN 60950 1992)
No users should access inside the control box. Access is limited to qualified personnel only. All user programming
for the controller is either done at one of the keyboards or at the PC.
Every effort is made to ensure that this manual is complete and free from errors. However we reserve the right to
make changes to these products and this manual without notice.
No liability is accepted for loss damage or injury as a consequence of using these products or instructions.
Firmware Version Number:
Crystal 4.26 and later
WEEE Certificate Number:
WEE/JG2915VS
Copyright BSB Electronics Ltd T/A Progeny Access Control
2014, all rights reserved.
