PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
91
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
Polygon tool
Area selection by defining a polygon shape. Finish area selection by double-
clicking with the mouse at or near the starting point.
•
TMA tool
TMA tool is used for selecting TMA spots on TMA slides. You can set the selection
settings on the following four tabs:
Figure 76: TMA tool
•
TMA Grid Setting
This function is enabled only if a TMA grid has already been placed on the preview
image. Set grid parameters (row and column numbers) and spot shape (round or
rectangle).
Figure 77: TMA tool: Grid selector
Delete TMA grid by clicking the
X
at the top right corner, and rotate grid by
clicking the icon at the bottom right corner. Enter the number of rows and
columns in the
Rows
and
Columns
fields or select the appropriate values with the
arrows. Enter the distance between two spots on the X and the Y axis in µm in the
Core distance
fields or select the appropriate values with the arrows. Enter the
average diameter of the spots in the
Core size
field or select the appropriate value
with the arrows.
•
Clear scanmap
The entire scanmap area will be cleared and reset to default.
