PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
56
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
o
Use marker with threshold
If the specimen cannot be identified as required for digitization, (for example,
weak contrast), it can help to encircle completely the specimen with a black
marker pen. You have to draw a full circle with the pen to enable the
detection. Marker pen detection will make specimen detection easier by
limiting the scanned area.
If this option is selected, only the area encircled with a marker pen will be
scanned. You can define the threshold level by changing the threshold value in
the Use marker with threshold selection box in the range of 0-255. This sets
the sensitivity of the specimen detection inside the marker area. To set the
desired threshold value manually, change the setting in the Specimen
threshold selection box in the range of 0-255.
o
Everything within marker
To scan everything within the marked area, check the Everything within
marker selection box.
Alternatively, click
in the preview window to activate this function.
Figure 35: Scan everything within the marked area (selected / not selected)
