PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
71
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
5.1.2.3
Exposure indicator
Activate Exposure indicator function by clicking
. Click
to calculate exposure time for
the actual Live image. In Brightfield mode there is no option for manually setting the values.
Exposure time can be displayed in microsecond, millisecond, and also in second.
Figure 51: Window of Exposure Indicator in Brightfield scan mode
5.1.2.4
Image intensity
Click
to open Image intensity settings window. An
image
is defined as a two-dimensional
function f(x, y) the amplitude of at any pair of coordinates (x, y) is called the
intensity
or gray
level of the
image
at that point. The pixel intensity at the coordinate pointing at with the cursor is
displayed in the Image Intensity window.
Figure 52: Window of Image Intensity
5.1.2.5
Stage positioning
Click
to activate
Stage Positioning Tool
to navigate on the slide, so to perform microscope
movements on the Live image with this control function. The number at the center of the
controller defines the step size by which the stage is moved. Value can be entered by hand or
with the slider.
Figure 53: Stage positioning tool
This tool offers easy and punctual slide navigation in distinctive steps. Set step size (FoV)
–
1
,
½
, or
¼
to determine the size of movement in proportion of one FOV. Click an arrow to move to the
required direction with the set step size.
