PANNORAMIC® CONFOCAL RX 1.0
TROUBLESHOOTING AND MAINTENANCE
MAY 13, 2021
153
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Removing filter cubes
Pull the filter cube outward by holding the side grip as shown in the below figure.
Figure 138: Removing the filter cube
9.5.6
Transporting
The following procedure shows how to transport Pannoramic® Confocal RX.
Notice:
The base unit has four carrying handles for transporting. Two or four people can carry the
base unit using these carrying handles. To determine the appropriate number of transporter
people, observe the laws of your country regarding load carrying capacity limitations. You
can find the weight data of the base unit in section
To transport Pannoramic® Confocal RX, do the following:
1.
Switch power supply off (see section
) and detach all other cables.
2.
Pull all four carrying handles (marked with red on the figure below) out until mechanical
stop position.
3.
Now you can transport Pannoramic® Confocal RX with the help of the required number of
people assisting you in transportation.
4.
After finishing transportation, push carrying handles back into normal position.
