PANNORAMIC® CONFOCAL RX 1.0
TROUBLESHOOTING AND MAINTENANCE
MAY 13, 2021
139
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
If the license file could not be generated due to some reason, the below window appears, and in this
case, you must contact 3DHISTECH Support at
.
9.2
Recovery functions
PSW automated backups allow you to continue scanning after unexpected events within as little
time as possible. After the program is restarted and the microscope is initialized, you can confirm
the automatic restore of pre-event state by clicking
Yes
.
Figure 127: Recovery confirmation window
Warning!
Click
Yes
only if you are sure that everything is completely unchanged after the previous run.
If anything has changed or you are unsure, click
No
.
For more comfortable and safer use, the
Planner autosave
function allows the taking of
automatic backups while creating a scan plan. The backups are placed in the default document
folder of the actual windows user and can be loaded by clicking the
Load plan
button.
9.3
Safety information
Check cables, plugs and connections before operation, and if defective or cannot be replaced,
contact 3DHISTECH Service for support.
Check whether the device is compatible with your local line voltage. It can operate at line voltages
100V to 240V and 50-60 Hz.
Only plug the device in a socket with protective grounding (earth) contact.
Do not operate the device in explosive environment.
Disconnect the device from the power outlet before opening it or replacing a part.
