PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
53
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
5
Scanning Modes and Settings
After microscope initialization, if fluorescence hardware option is provided, you can select from
the following two modes:
•
Brightfield scanning mode
(see
chapter 5.1 Brightfield Scanning Mode
for more
information)
•
Fluorescence scanning mode
(see
chapter 5.2 Fluorescence Microscope Mode
for
more information)
•
Option modes
o
Microscope mode
(available only if
Services
or
Settings
mode is active)
o
Settings
chapter 6 Settings and services
for more information)
o
Services
(see
chapter 6 Settings and services
for more information)
In accordance with the selected mode, the
Profile Settings Panel
and the
Microscope Control
Panel
views are modified.
5.1
Brightfield Scanning Mode
Microscope View consist of three different sections:
•
Main functions
: Located at below the window header, these functions are
identical in both modes.
•
Profile Settings panel
: Profile settings containing parameters used for scanning.
•
Microscope Control Panel
: Live microscope movement functions
Figure 30: Main window of Brightfield Microscope mode
