PANNORAMIC® CONFOCAL RX 1.0
SETTINGS AND SERVICES
MAY 13, 2021
118
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
For
Slide scanning has finished
and
Scanning error has occurred
you can define
the external software by entering the file path in the
Application
box, or by
browsing for it by clicking
.
If you define parameters in the
Parameters
field, it will pass them to the software
that it starts. If no parameter is defined, then the parameter will not be passed.
The default parameters are the following:
o
For
Slide scanning has finished
: "<SLIDENAME>"
–
transfers the slide name.
o
For
Scanning error has occurred
: "<ERRORTEXT>"
–
transfers the error
message.
NOTE
: Pannoramic® Scanner Software for Research control software can provide
not only the “<SLIDENAME>” but the path of the digital slide as well.
Run
defines the window mode that the external application will start in. The
following window modes can be set:
•
Normal window
•
Minimized
•
Maximized
You can test whether the
Scanning Error Occurred
settings work by clicking
Caution!
If
C:\ProgramData\3DHISTECH\SlideScanner\MessengerUserPreferences.xml
is missing or
damaged, the
External application call
feature will not be able to read the address book,
therefore it will not operate. To solve this issue, the address book must be repaired or
created again.
In the
Message Call
section of the window complex messaging functions can be
defined. Here you can setup parameters of the mail server, add or remove users,
and also set the message body in the
Message subject
field by entering a text for
example, to inform recipients on the location of the scanner, or the slide set you
are working with.
Click
to test settings (by sending an e-mail to the address defined in the
E-
mail To
field) after you have finished to check their relevancy before applying
them.
