PANNORAMIC® CONFOCAL RX 1.0
SETTINGS AND SERVICES
MAY 13, 2021
113
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
Calculate exposure time for barcode grabbing
–
Three images are recorded for
barcode image creation. Exposure times will be recalculated each time, thus
creating prefect light conditions for barcode reading, so to make sure that
barcode identification is successful.
•
Rotate barcode image by 180° degrees.
•
Unload slide after planner scan
Scanning History
•
Hardware log
Scanner hardware operations are contained in this log. To enable this function,
first the database from the following folder must be loaded:
C:\ProgramData\3DHISTECH\SlideScanner\HWLogDataBase.
The following motor movements are recorded in the log list:
o
Camera Changer
o
Confocal RX
o
DFP Light
o
Filter Wheel
o
General
o
Halogen Light
o
Microscope Part
o
Confocal RX Loader
o
ND
o
Objective Changer
o
Preview Light
o
RGB Light
o
Relay
o
Scan Loader
o
Service
o
Shutter
o
Slide Scanner
o
Stage
o
Waterpump
