PANNORAMIC® CONFOCAL RX 1.0
USING PROFILES
MAY 13, 2021
132
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
8
Using Profiles
Notice:
Saved profile settings can be used only on that specific Pannoramic® scanner you are
working with.
If you want to scan a group of slides, it is advised to save your settings previously in a profile and
continue scanning in Automatic mode. You can save the following settings in a profile:
Scan Mode
•
Brightfield
•
Fluorescent
Scan Options
•
Focus frequency (in Fluorescent mode)
•
Focus frequency (in Brightfield mode)
•
Compression procedure
•
Use of a fixed compensation image (in Brightfield mode - ON/OFF)
•
Use of Save focus quality (ON/OFF)
•
Use of stitching (ON/OFF)
Determination of the area to be scanned
•
Use of automatic threshold specimen
•
Use of specimen threshold value
•
Use of marker pen threshold and specimen threshold values
•
Use of scan everything within marked area (ON/OFF)
•
Remove coverslip function (ON/OFF)
•
Filling of holes (ON/OFF)
•
Use of removing specks according to the set value (ON/OFF)
•
Use saved scan area
•
Use selection box (ON/OFF)
