PANNORAMIC® CONFOCAL RX 1.0
OPERATING SLIDES AND TRAYS
MAY 13, 2021
30
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
To insert and remove slide trays
Figure 9: Inserting the slide tray
1)
Open slide tray feeder door (
1
).
2)
Insert the tray (
3
) that contains at least one slide onto the tray rail (
2
), then push the tray
until it stops.
3)
After digitizing slides, the tray is moved to the output position where it can be removed.
Caution!
To insert or remove a filled tray from the device, first check tray for incorrectly inserted
slides (refer to
Figure 8
) and always ensure also when moving the tray, slightly tilt it to its
closed side to prevent the slides from accidentally falling out. Inserts should always be kept
clean from dust, broken glass, and other mounting media residues. Slides will only operate
safely and properly if trays are clean.
Warning!
Do not reach into the feeding area while slides are digitized.
