PANNORAMIC® CONFOCAL RX 1.0
NOTES REGARDING OPERATIONAL SAFETY
MAY 13, 2021
9
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Notes Regarding Operational Safety
The below section of this User’s Guide contains
information and warnings of a kind that must be
followed by owner/operator personnel. Warning and advisory symbols which are used on the
base unit of the Pannoramic® Confocal RX and in section
1.1.3 Warning and Information Labels
have the following meanings:
Disconnect mains plug!
Remember to unplug the power cord before you open the Pannoramic® Confocal RX main
unit for maintenance.
Crush hazard!
There is crush hazard at the following areas of the device:
•
At the movement area of the slide tray during operation. Please note that the
digitizing process has to be interrupted and the tray moved via the software to the
output position before removing it.
•
The tray feeder door, the cross-belt area of the tray guide, and the safety plate
during operation. Please note that the digitizing process has to be interrupted and
the tray moved via software to the output position before removal.
•
The two hinges of the service door.
•
The inner side of the door opener mechanism.
•
When reaching by the pipette unit into the farthest area of the device.
The Pannoramic® Confocal RX, including any of its original accessory components, should not be
operated in any other way than described in
. Any of the following notes
should be strictly observed:
Warning!
The Pannoramic® Confocal RX may not be operated by other than properly instructed
persons. Operating personnel must be fully aware of the potential dangers which a
particular field of application involves. The Pannoramic® Confocal RX is a precision
instrument which may suffer a significant reduction in operational functions or even physical
destruction following intervention performed in any nonconforming manner. If the
equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
