PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
108
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
5.3.5
Table view mode
By selecting
at
Appearance
settings, each slide will be displayed in a separate row.
Click
to assign profile to a slide, and
to detach a profile from a slide. A slide can have more
than one profile assigned to it, and these profiles can either be BF or FL if the scann er is capable
to operate in these two scanning modes.
Figure 106: Table view mode
In Table view the following information are displayed in the profile strip based on the loaded
profile:
•
Profile name
•
Illumination
•
Priority
•
Quant probe
•
Objective type
•
Filters
•
Progress
•
Scan properties: the location of the virtual slide with the selected profile can be
defined.
o
Scan result
o
Scan duration
o
Scanned FOVs
o
Total no. of FOVs
•
Profile editor for Scheduler
•
Notes
