PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
104
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
Profile management for selected magazine
includes the following global
settings applicable to all trays:
o
Generate random planned rack
o
Add current profile for all slides
o
Open profile to all slides
o
Detach current profile from all slides
o
Detach profiles from slides
o
Clear all slide results
5.3.3
General functions at the slide menu
•
Mark empty slide positions
–
Define range in the
Range to skip
boxes to set
multiple slide positions as empty. For single slides, enter / set slide position with
the arrows in the
Range to skip
box or right-click on a slide and select
Skip
.
•
Click
Reset
at the Slides settings bar to cancel slide selections as empty, or right-
click the thumbnail of a slide selected as skipped and click
Reset
.
Figure 100: General functions at the slide menu
•
You can apply a selected profile to a defined range of slides at the
Profile range
section. Set the slide positions within the range (first and last slide) then click
.
•
You can also set
Scan properties range
to a slide with a profile attached. When
more profiles are attached to a slide, always the last scan record will be set with
the selected scan property.
Figure 101: Scan properties range
