PANNORAMIC® CONFOCAL RX 1.0
SETTINGS AND SERVICES
MAY 13, 2021
114
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
Software log
All the circumstances and states of the slide scanning procedure is saved. LogID is
the sequence number of scanning performed on the scanner in use. (Profile
Name, Illumination mode, Scan type, Scan Start, Scan Finished, URL, Error)
Figure 111: Scanning log
Filtering for the following parameters is available:
o
Scanning date
o
Profile name
o
Illumination mode
o
URL
o
Slide name
o
Slide index
o
Tray index
General naming settings
Naming pattern
–
The set string defines the slide naming pattern (shown by the example below
the text box). Click
Reset
to set pattern to default. The abbreviations and their meaning are listed
at the bottom of the section under
Usable abbreviations
.
