PANNORAMIC® CONFOCAL RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
67
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
TMA tool
–
TMA tool is used for selecting TMA spots on TMA slides. You
can set the selection settings on the following four tabs:
Figure 45: TMA grid preview
•
TMA Grid Setting
–
This function is enabled only if a TMA grid has already
been placed on the preview image. Set grid parameters (row and column
numbers) and spot shape (round or rectangle).
Figure 46: TMA tool: Grid selector
Delete TMA grid by clicking the
X
at the top right corner, and rotate grid by
clicking the icon at the bottom right corner. Enter the number of rows and
columns in the
Rows
and
Columns
fields or select the appropriate values with the
arrows.
Enter the distance between two spots on the X and the Y axis in µm in the
Core
distance
fields or select the appropriate values with the arrows. Enter the average
diameter of the spots in the
Core size
field or select the appropriate value with
the arrows.
•
Clear scanmap
–
The entire scanmap area will be cleared and reset to
default.
