PANNORAMIC® CONFOCAL RX 1.0
SETTINGS AND SERVICES
MAY 13, 2021
115
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
–
Basic settings
Figure 112: Basic settings
•
On this panel, you can define the swap file location in the
Swap location
field, set
the value of
Shutter auto close time in FL
, and define a value in the
Number of
compensation images
the preview camera should take, if needed.
•
By activating the
Inspect area beyond coverslip edge
function, a compensation
image of the area beyond the coverslip area can be taken.
Consequently, when this function is turned off, the area beyond the coverslip is
not taken into account by the scanner software when creating the compensation
image.
•
For a more comfortable and safer use, turn on
Planner Autosave
function to save
a scan plan, and by defining a location in the
Planner autosave folder
field the
scan plan will be automatically saved.
•
Set the character as value separator used in the Planner export file at the
CSV
separator
field.
•
Click
Apply
to accept modifications.
