Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 536 / 1812

February 2013
2-512 ColorQube® 9303 Family
99-824-00 to 99-838-00
Status Indicator RAPs
99-824-00 to 99-838-00 PEST Error 38 RAP
99-824-00 Motor, head stitch 1-2 power fault.
99-829-00 Motor, carriage restraint upper/lower fault.
99-830-00 Motor, carriage select open.
99-831-00 Motor, carriage select short.
99-832-00 Motor, carriage drive open.
99-833-00 Motor, carriage drive short.
99-834-00 Motor, carriage drive power fault.
99-835-00 Motor, head maint vertical open.
99-836-00 Motor, head maint vertical short.
99-837-00 Motor, head maint horizontal open.
99-838-00 Motor, head maint horizontal short.
Initial Actions
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1 . Perform the relevant action. For an explanation of PEST codes refer to
dC123 .
Table 1 PEST codes and action
Code Hard/Soft Action
99-824 Soft Go to the 91-504-00, 91-505-00 Printhead Stitch Motor Over Current
RAP. Check printhead 1 and 2 stitch adjust motor.
99-829 Soft This fault code is shown for information only. The machine does not
have carriage restraint motors.
99-830 Hard Refer to WD 9.11 . Check the DC cabling to the carriage drive select
motor. Measure the resistance at PJ607 on the marking unit driver PWB
for an open or short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the carriage drive select
motor. If a short is measured, the marking unit driver PWB may be dam-
aged and be reported as an ‘open’ error.
If a short error is reported, the motor is drawing excessive power.
Install new components as necessary, carriage drive chain,
PL 91.10
Item 1 , marking unit driver PWB, PL 92.10 Item 4 .
Refer to the 91-560-00 Carriage Selection Time Out RAP. Check the
carriage drive select motor.
99-831 Hard Refer to WD 9.11 . Check the DC cabling to the carriage drive select
motor. Measure the resistance at PJ607 on the marking unit driver PWB
for an open or short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the carriage drive select
motor. If a short is measured, the marking unit driver PWB may be dam-
aged and be reported as an ‘open’ error.
If a short error is reported, the motor is drawing excessive power.
Install new components as necessary, carriage drive chain,
PL 91.10
Item 1 , marking unit driver PWB, PL 92.10 Item 4 .
Refer to the 91-560-00 Carriage Selection Time Out RAP. Check the
carriage drive select motor.
99-832 Hard Refer to WD 9.2 and WD 9.6 Check the cable between PJ603 on the
drum driver PWB and PJ403 on the IME controller PWB. Ensure the
connectors are fully seated.
Refer to
WD 9.11 . Check the DC cabling to the carriage docking motor.
Measure the resistance at PJ605 on the marking unit driver PWB for an
open or short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the carriage docking
motor. If a short is measured, the marking unit driver PWB may be dam-
aged and be reported as an ‘open’ error.
If a short error is reported, the motor is drawing excessive power.
Install new components as necessary, carriage docking motor,
PL 91.10
Item 16 , marking unit driver PWB, PL 92.10 Item 4 .
Refer to the 91-567-00 to 91-568-00 Lower Carriage Error RAP.
99-833 Hard Refer to WD 9.11 . Check the DC cabling to the carriage docking motor.
Measure the resistance at PJ605 on the marking unit driver PWB for an
open or short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the carriage docking
motor. If a short is measured, the marking unit driver PWB may be dam-
aged and be reported as an ‘open’ error.
If a short error is reported, the motor is drawing excessive power.
Install new components as necessary, carriage docking motor,
PL 91.10
Item 16 , marking unit driver PWB, PL 92.10 Item 4 .
Refer to the 91-567-00 to 91-568-00 Lower Carriage Error RAP.
Table 1 PEST codes and action
Code Hard/Soft Action