Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 191 / 1812

February 2013
2-167 ColorQube® 9303 Family
12D-171
Status Indicator RAPs
If the booklet crease position does not conform to the specification in Table 5 , perform ADJ
12.7-171 Booklet Crease Position.
Booklet Staple Position is Not On The Fold
Figure 5 , open out the booklet at the centre page and press it onto a flat surface. Measure the
position of the booklet staple from the crease line.
Figure 5 Booklet staple position
If the booklet staple position does not conform to the specification in Figure 5 , perform ADJ
12.8-171 Booklet Staple Position.
The Booklet is Not Sufficiently Creased
Figure 6 , Measure the open dimension of the booklets.
Figure 6 Booklet creasing
If the open dimension of the booklets does not conform to the specification in Table 6 , install
new crease nip springs, PL 12.170 Item 12 .
Staple position
must align with the
/-1.5mm
Table 6 Creasing tolerance
Paper weight
Paper size A4,
8.5x11in,
8.5x13in or
8.5x14in
Paper size A4,
8.5x11in, 8.5x13in
or 8.5x14in
Paper size A3 or
11x17in Paper size A3 or
11x17in
- 95% of booklets 99.7% of booklets 95% of booklets 99.7% of booklets
80gsm (20lb) Less than 30mm Less than 35mm Less than 22mm Less than 25mm