Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 1367 / 1812

February 2013
6-75 ColorQube® 9303 Family
GP 22
General Procedures/Information
GP 22 Electrical Power Requirements
Go to the relevant section.
• Power Requirements
• Power Save Modes
Power Requirements
For voltage and current requirements refer to Table 1 and Table 2 .
Power Save Modes
There are two customer adjustable power save modes:
• Low Power Mode
• Sleep Mode
The power usage for all product configuration at nominal and maximum usage for a base con-
figuration with OCT, LCSS and HVF finisher options, refer to
Table 3 .
Low Power Mode
The low power mode is automatically entered after a period of non-activity or by pressing the
Energy Saver key on the user interface. The period of non-activity can be set to between 1 and
120 minutes by the system administrator. The mode of power is returned to standby following a
user request, a key press on the user interface or by network activity.
Sleep Mode
The sleep mode is automatically entered after a period of non-activity after entry into low power
mode. The period of non-activity can be set to between 1 and 120 minutes by the system
administrator. The mode of power is returned to standby following a user request, a key press
on the user interface or by network activity.
• Plug-in mode: This is US Presidential Order requirement specifies that any product when
plugged into a mains supply outlet shall consume less than 1W when the product is
switched off.
• Sleep mode: Average measurement taken over 2 hours.
Table 1 Supply voltage requirements
Nominal Voltage
(VAC)
Maximum (VAC) Minimum (VAC)
Frequency
upper (Hz) Frequency
lower (Hz)
110 to 127 140 99 63 47
220 to 240 254 187 63 47
Table 2 Supply current requirements
Nominal Voltage (VAC) Frequency (Hz) Current (A) Comments
110 60 Less than or equal to
15 Specific XLA mar-
kets only.
127 60 Less than or equal to
15 Mandatory for Saudi
Arabia only.
127 60 Less than or equal to
15 To operate at 127V
+10% for long term
periods. Mandatory
for Mexico only.
120 in run mode 60 Less than or equal to
12 120V is nominal for
USA and Canada.
120 in warm up 60 Less than or equal to
15 All 60Hz markets
including USA and
Canada.
220 50 Less than or equal to
10 Europe and other
50Hz markets.
230 50 Less than or equal to
10 Europe and other
50Hz markets.
240 50 Less than or equal to
10 Europe and other
50Hz markets.
Table 3 Power consumption
Configuration PPM
Run mode
average
(Watt@
120V)
Run mode
maximum
(Watt @
120V)
Standby
(Watt@
120V)
Low
power
(Watt@
120V)
Sleep
(Watt @
120V)
Plug-in-
mode
(Watt
@120V)
9301 base machine 40 848 1275 479 220 112 1
9302 base machine 45 878 1392 479 220 112 1
9303 base machine 50 908 1410 479 220 112 1
9301 plus LCSS 40 923 1380 489 220 112 1
9302 plus LCSS 45 953 1497 489 220 112 1
9303 plus LCSS 50 983 1515 489 220 112 1
9301 plus HVF 40 993 1565 499 220 112 1
9302 plus HVF 45 1023 1582 499 220 112 1
9303 plus HVF 50 1053 1600 499 220 112 1