Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 572 / 1812

February 2013
2-548 ColorQube® 9303 Family
OF 4a
Status Indicator RAPs
16-521-00 Some network services
involving CPI are not avail-
able. Notify your system
administrator
The network control-
ler’s CPI service pro-
cess has stopped Machine services are tempo-
rarily disabled. The network
controller connection is
about to be reset
16-522-00 Some network services
involving job log are not
available. Notify system
administrator
The network control-
ler’s job log service
process has stopped Some network services are
not available. The network
controller connection is
about to be reset
16-523-00 Some network services
with job tracker are not
available. Notify your sys-
tem administrator
The network control-
ler’s job tracker service
process has stopped Some network services are
not available. The network
controller connection is
about to be reset
16-524-00 Some network services
with Kerberos are not
available. Notify your sys-
tem administrator
The network control-
ler’s Kerberos service
process has stopped Some network services are
not available. The Network
Controller connection is
about to be reset
16-525-00 Scan to distribution ser-
vices are not available.
Notify your system admin-
istrator
The network control-
ler’s scan to distribu-
tion service process
has stopped Some network services are
not available. The network
controller connection is
about to be reset
16-526-00 Some network services
involving SMB are not
available. Notify your sys-
tem administrator
The network control-
ler’s SMB service pro-
cess has stopped. Some network service are
not available. The network
controller connection is
about to be reset
16-527-00 Some network services
involving TCP/IP are not
available. Notify your sys-
tem administrator
The network control-
ler’s TCP/IP service
process has stopped. Some network service are
not available. The network
controller connection is
about to be reset
16-528-00 Network services using
WS scan temp are not
available. Notify your sys-
tem administrator
The network control-
ler’s WS scan temp
service process has
stopped. Some network service are
not available. The network
controller connection is
about to be reset
16-529-00 Network services with
Scan compressor are not
available. Notify your sys-
tem administrator
The network control-
ler’s Scan compressor
service process has
stopped. Some network service are
not available. The network
controller connection is
about to be reset
16-533-00 Service limit exceeded.
New services will not be
available until some ser-
vices are removed
Controller software
service limit exceeded Remove some existing ser-
vices to enable new services
to be added. Machine ser-
vices are available but may
be degraded
16-535-00 Immediate job overwrite
failed. Perform an on
demand overwrite immedi-
ately
Immediate job over-
write failed Immediate job overwrite
failed. Administrator inter-
vention is required to per-
form an on demand
overwrite immediately
Table 9 Chain 16 Status codes
Status
Code
UI Message Reason for Message Reference / Action
16-536-00 Network controller error.
Some network services
not available. Notify sys-
tem administrator.
The XSA service is
unavailable. Network
controller error Switch the machine off then
on,
GP 14 .
16-544-00 Network cable unplugged An Ethernet cable is
unplugged Ensure cables are properly
connected
16-550-00 Machine entering SW
upgrade mode. ALL jobs
will be cancelled.
Machine entering SW
upgrade mode - all
jobs will be canceled. The machine entered a soft-
ware upgrade mode (all jobs
will be deleted). No user
intervention is required.
Machine services are
unavailable until the software
upgrade process has com-
pleted.
16-551-00 Accounting out of memory.
Notify your system admin-
istrator
Network controller -
accounting log is full or
a hard disk full state
exists Accounting administrator
needs to retrieve accounting
data log from the system
16-553-00 Additional memory is
required to support scan to
file. Notify your system
administrator
Network controller - not
enough physical mem-
ory is configured on the
platform to support
scan to file Switch the machine off then
on,
GP 14 . Hardware must
be added or replaced.
16-554-00 Workflow scanning hard-
ware must be added or
replaced. Notify your sys-
tem administrator
Network controller -
hardware must be
added or replaced Hardware must be added or
replaced.
16-555-00 Insufficient memory for
Fax job. Notify your sys-
tem administrator.
Network controller - not
enough physical mem-
ory is configured on the
platform to support
LAN Fax Additional memory required
to support Fax. The Fax ser-
vice is not available
16-556-00 No message There is an authentica-
tion problem between
the 802.1x device and
the 802.1x server User intervention is required
to check the settings on the
802.1x device to ensure they
match the 802.1x server,
then switch the machine off
then on,
GP 14 .
16-557-00 Network services using
DC platform recovery not
available. Notify system
administrator
Network controller DC
platform recovery
failed Switch the machine off then
on,
GP 14
16-558-00 Network services using
DC platform recovery not
available. Notify system
administrator
Network controller DC
communications failed Switch the machine off then
on,
GP 14
Table 9 Chain 16 Status codes
Status
Code
UI Message Reason for Message Reference / Action