Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 544 / 1812

February 2013
2-520 ColorQube® 9303 Family
99-922-00 to 99-938-00
Status Indicator RAPs
99-922-00 to 99-938-00 PEST Error 43 RAP
99-922-00 Motor, MP4 power low.
99-923-00 Motor, MP4 power high.
99-925-00 Motor, MP5 open.
99-926-00 Motor, MP5 short.
99-927-00 Motor, MP5 power low.
99-928-00 Motor, MP5 power high.
99-930-00 Motor (M7), MSI tray 4 feed open.
99-931-00 Motor (M7), MSI tray 4 feed short.
99-932-00 Motor (M7), MSI tray 4 feed power low.
99-933-00 Motor (M7), MSI tray 4 feed power high.
99-934-00 Motor, 3TM horizontal transport power low.
99-935-00 Motor, 3TM horizontal transport open.
99-936-00 Motor, 3TM horizontal transport short.
99-937-00 Motor, 3TM tray 3 elevator open.
99-938-00 Motor, 3TM tray 3 elevator short.
Initial Actions
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
• Check connections of the indicated component
Procedure
Refer to Table 1 . Perform the relevant action. For an explanation of PEST codes refer to
dC123 .
Table 1 PEST codes and action
Code Hard/Soft Action
99-922 Soft Go to the 10-110-00 to 10-113-00, 10-125-00 to 10-128-00, 10-147-00,
10-148-00 Post Transfix Jam RAP. Check the post transfix motor.
99-923 Soft Go to the 10-110-00 to 10-113-00, 10-125-00 to 10-128-00, 10-147-00,
10-148-00 Post Transfix Jam RAP. Check the post transfix motor.
99-925 Hard Refer to WD 8.2 . Check the DC cabling to the exit motor (M5). Measure
the resistance at PJ303 on the media path driver PWB for an open or
short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the exit motor (M5). If a
short is measured, the media path driver PWB may be damaged and be
reported as an ‘open’ error.
If short error is reported, the motor is drawing excessive power.
Install new components as necessary, exit motor (M5),
PL 10.15 Item
11 , media path driver PWB, PL 1.15 Item 5 .
Refer to the 83-500-00 Output Transport Motor M5 Failure RAP. Check
the exit motor.
99-926 Hard Refer to WD 8.2 . Check the DC cabling to the exit motor (M5). Measure
the resistance at PJ303 on the media path driver PWB for an open or
short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the exit motor (M5). If a
short is measured, the media path driver PWB may be damaged and be
reported as an ‘open’ error.
If short error is reported, the motor is drawing excessive power.
Install new components as necessary, exit motor (M5),
PL 10.15 Item
11 , media path driver PWB, PL 1.15 Item 5 .
Refer to the 83-500-00 Output Transport Motor M5 Failure RAP. Check
the exit motor.
99-927 Soft Go to the 83-500-00 Output Transport Motor M5 Failure RAP. Check the
exit motor.
99-928 Soft Go to the 83-500-00 Output Transport Motor M5 Failure RAP. Check the
exit motor.
99-930 Soft Go to the 74-101-00, 74-160-00 to 74-161-00 Bypass Tray 4 Mis-Feed
RAP. Check the bypass feed motor.
99-931 Hard Refer to WD 8.3 . Check the DC cabling to the bypass feed motor. Mea-
sure the resistance at PJ405 on the media path driver PWB for an open
or short circuit and to the chassis for a short circuit.
If a fault is found, repeat the measurement at the bypass feed motor. If a
short is measured, the media path driver PWB may be damaged and be
reported as an ‘open’ error.
If short error is reported, the motor is drawing excessive power.
Install new components as necessary, bypass module,
PL 74.10 Item 1 ,
media path driver PWB, PL 1.15 Item 5 .
Refer to the 74-101-00, 74-160-00 to 74-161-00 Bypass Tray 4 Mis-
Feed RAP. Check the bypass feed motor.
99-932 Soft Go to the 74-101-00, 74-160-00 to 74-161-00 Bypass Tray 4 Mis-Feed
RAP. Check the bypass feed motor.
99-933 Soft Go to the 74-101-00, 74-160-00 to 74-161-00 Bypass Tray 4 Mis-Feed
RAP. Check the bypass feed motor.
99-934 Soft Go to the 71-101-00 to 71-161-00 RAP. Check the 3 tray transport
motor.
99-935 Soft Go to the 71-101-00 to 71-161-00 RAP. Check the 3 tray transport
motor.
Table 1 PEST codes and action
Code Hard/Soft Action