Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 534 / 1812

February 2013
2-510 ColorQube® 9303 Family
99-785-00 to 99-802-00, 99-805-00 to 99-823-00
Status Indicator RAPs
99-785-00 to 99-802-00 PEST Error 36 RAP
99-785-00 Pump, DMU return open.
99-786-00 Pump, DMU return short.
99-801-00 Motor, drum maint open.
99-802-00 Motor, drum maint short.
Initial Actions
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1 . Perform the relevant action. For an explanation of PEST codes refer to
dC123 .
99-805-00 to 99-823-00 PEST Error 37 RAP
99-805-00 Motor, drum maint above max.
99-810-00 Motor, head roll 1 open.
99-811-00 Motor, head roll 1 short.
99-812-00 Motor, head roll 2 open.
99-813-00 Motor, head roll 2 short.
99-814-00 Motor, head roll 3 open.
99-815-00 Motor, head roll 3 short.
99-816-00 Motor, head roll 4 open.
99-817-00 Motor, head roll 4 short.
99-818-00 Motor, head roll 1-4 power fault.
99-819-00 Motor, head roll 1-4 power fault.
99-820-00 Motor, head stitch 1 open.
99-821-00 Motor, head stitch 1 short.
99-822-00 Motor, head stitch 2 open.
99-823-00 Motor, head stitch 2 short.
Initial Actions
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1 . Perform the relevant action. For an explanation of PEST codes refer to
dC123 .
Table 1 PEST codes and action
Code Hard/Soft Action
99-785 Hard Go to the 94-528-00, 94-532-00, 94-533-00 Cleaning Unit Over Current
RAP. Check the DC cabling to the cleaning unit. If necessary, install a
new cleaning unit.
99-786 Soft Go to the 94-528-00, 94-532-00, 94-533-00 Cleaning Unit Over Current
RAP. Check the DC cabling to the cleaning unit. If necessary, install a
new cleaning unit.
99-801 Hard Refer to WD 9.2 and WD 9.3. Check the DC cabling to the cleaning unit
motor. Measure the resistance between PJ601 pins 5 and 10 on the
drum driver PWB for an open or short circuit and to the chassis for a
short circuit.
If a fault is found, repeat the measurement at the cleaning unit motor. If
a short is measured, the drum driver PWB may be damaged and be
reported as an ‘open’ error. If short error is reported, the cleaning unit
motor is drawing excessive power. Install new components as neces-
sary, cleaning unit motor assembly,
PL 94.10 Item 19 , Drum driver
PWB, PL 1.15 Item 4 .
99-802 Hard Refer to WD 9.2 and WD 9.3. Check the DC cabling to the cleaning unit
motor. Measure the resistance between PJ601 pins 5 and 10 on the
drum driver PWB for an open or short circuit and to the chassis for a
short circuit.
If a fault is found, repeat the measurement at the cleaning unit motor. If
a short is measured, the drum driver PWB may be damaged and be
reported as an ‘open’ error. If short error is reported, the cleaning unit
motor is drawing excessive power. Install new components as neces-
sary, cleaning unit motor assembly,
PL 94.10 Item 19 , Drum driver
PWB, PL 1.15 Item 4 .
Table 1 PEST codes and action
Code Hard/Soft Action
99-805 Soft Go to the 94-520-00 Cleaning Unit Drive Error RAP. Check the cleaning
unit motor.
99-810 Soft Go to the 91-506-00 to 91-509-00 Roll Motor Over Current RAP. Check
printhead 1 roll adjust motor.