Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 95 / 1812

February 2013
2-71 ColorQube® 9303 Family
10-140-00 to 10-146-00, 10-149-00 to 10-151-00
Status Indicator RAPs
10-140-00 to 10-146-00, 10-149-00 to 10-151-00 Exit Jam
RAP
10-140-00 Timing sensor 15 detects that the sheet is too long.
10-141-00 Timing sensor 15 detects that the sheet is too short.
10-142-00 Timing sensor 15 detects that the sheet is too long after invert.
10-143-00 Timing sensor 15 detects that the sheet is too short after invert.
10-144-00 The lead edge is late to timing sensor 15.
10-145-00 The trail edge is late from timing sensor 15.
10-146-00 The lead edge is late to timing sensor 15 after invert.
10-149-00 The lead edge is early to timing sensor 15.
10-150-00 The lead edge is early to timing sensor 15 after invert.
10-151-00 The trail edge is late from timing sensor 15 after invert.
Initial Actions
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
• Check that the media loaded into the trays matches the UI display.
• Check for obstructions in the paper path.
• Check the jam clearance guide 3b and 4a are latched correctly
• Check for multifeeds. If there are multifeeds, refer to the OF 8 Multifeed Rap.
• If glossy media is used, instruct the customer to feed the media from the bypass tray and
select glossy for the media type.
Procedure
Cheat the front door interlock. Enter dC330 code 10-017 exit sensor (15), Q10-017, PL 10.15
Item 3 . Raise and lower handle 4a to actuate Q10-017. The display changes.
Y N
Refer to
WD 8.5 . Check Q10-017. Refer to:
• GP 11 How to Check a Sensor.
• PJ905, Media path driver PWB.
• 01D +5V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Exit sensor (15), PL 10.15 Item 3 .
• Media path driver PWB, PL 1.15 Item 5 .
Enter dC330 code 83-006 exit duplex diverter solenoid, SOL83-006, PL 10.15 Item 14 . Press
Start. SOL83-006 energizes.
Y
N
Refer to
WD 8.1 . Check SOL83-006. Refer to:
• GP 12 How to Check a Solenoid or Clutch.
• PJ303, Media path driver PWB.
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Exit / duplex diverter solenoid, PL 10.15 Item 14 .
• Media path driver PWB, PL 1.15 Item 5 .
The diverter gate moves and retracts freely within one second.
Y
N
Check the operation and condition of the diverter gate. If necessary install new diverter
gate components,
PL 10.15 , or install a new exit paper path assembly, PL 10.15 Item 19 ,
as necessary.
Enter dC330 code 10-018 Post transfix motor (M4) MOT10-018. MOT10-018 runs.
Y N
Refer to
WD 8.2 . Check MOT10-018. Refer to:
• GP 10 How to Check a Motor.
• PJ303, Media path driver PWB.
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Post transfix motor (M4), PL 10.10 Item 5 .
• Media path driver PWB, PL 1.15 Item 5 .
Enter dC330 code 83-001 exit motor (M5), MOT83-001. MOT83-001 runs.
Y N
Refer to
WD 8.2 . Check MOT83-001. Refer to:
• GP 10 How to Check a Motor.
• PJ303, Media path driver PWB.
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Exit motor (M5), PL 10.15 Item 11 .
• Media path driver PWB, PL 1.15 Item 5 .
The exit paper path rolls rotate.
Y
N
Check the drive belt, pulleys and drive gears on the exit paper path assembly,
PL 10.15 .
If necessary, install new components:
• Roller nip N, PL 10.15 Item 1 .
• Roller nip P, PL 10.15 Item 6 .
• Pulley 3 mm driven, PL 10.15 Item 7 .
A
A
B