Xerox ColorQube 9303 Series, Руководство по обслуживанию

Страница: 134 / 1812

February 2013
2-110 ColorQube® 9303 Family
12-061-00-171, 12-416-00-171, 12-062-00-171
Status Indicator RAPs
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• BM PWB, PL 12.175 Item 10 .
• BM crease blade motor encoder sensor, PL 12.170 Item 1 .
Enter dC330 , code 12-252 to run the BM crease blade motor, MOT12-252, PL 12.170 Item 3 .
The motor runs.
Y
N
Go to
WD 12.18 . Check MOT 12-252.
Refer to:
• GP 10 How to Check a Motor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• BM crease blade motor assembly, PL 12.170 Item 3 .
• BM PWB, PL 12.175 Item 10 .
The fault may be intermittent, check for damaged wiring or bad connectors, REP 1.1 . If neces-
sary install new components.
12-062-00-171 HVF BM Crease Roll Motor Failure RAP
12-062-00-171 The HVF BM crease roll motor has failed to run.
Initial Actions
Clear any paper jam in the area of the crease rolls.
Procedure
WARNING
Keep away from the crease blade mechanism when working in close proximity to the
booklet maker while the machine is powered on. The crease blade mechanism activates
quickly and with great force.
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Release the crease roll nip pressure by moving the crease roll handle (6c), PL 12.150 Item 5 ,
fully counter clockwise. Remove the BM right hand cover, PL 12.185 Item 15 , to access the
crease rolls. Enter dC330 code 12-216. Actuate the BM crease roll motor encoder sensor by
rotating the crease rolls slowly by hand. The display changes.
Y
N
Go to
WD 12.17 . Check the BM crease roll motor encoder sensor, Q12-216, PL 12.175
Item 9 .
Refer to:
• GP 11 How to Check a Sensor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• BM PWB, PL 12.175 Item 10 .
• BM crease roll motor encoder sensor, PL 12.175 Item 9 .
Enter dC330 , code 12-253 to run the BM crease roll motor, MOT12-253, PL 12.175 Item 12 .
The motor runs.
Y
N
Go to
WD 12.18 . Check the BM crease roll motor, MOT12-253.
Refer to:
• GP 10 How to Check a Motor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• BM crease roll motor, PL 12.175 Item 12 .
• BM PWB, PL 12.175 Item 10 .
The fault may be intermittent, check for damaged wiring or bad connectors, REP 1.1 . If neces-
sary install new components:
• BM crease roll motor encoder sensor, PL 12.175 Item 9 .
• BM crease roll motor, PL 12.175 Item 12 .
• BM PWB, PL 12.175 Item 10
A