Xante PlateMaker 3, Руководство пользователя

Страница: 111 / 298

___________________________________________ PC Setup 4-21
a. In the PostScript output format box, select PostScript
(optimized for speed) if you have a Pentium processor. If
not, select PostScript (optimized for portability-ADSC).
b. Under PostScript header, select Download header with
each print job.
c. Under PostScript timeout values, make sure the settings are
• Job timeout: 0
• Wait timeout: 240
7. Click the General tab if you want to print a test page; then,
click Apply and then Print Test Page. Then, skip to step 9.
8. Select Yes for Send Control D after each Job (Windows NT
4.X).
9. Click OK. The Printer Properties window closes.
10. Select File: Close. The Printers window closes.
After the AdobePS printer driver and PPD are installed and
configured, you need to do one of the following:
Windows 95 or 98—to verify that printer interfaces are properly
configured, see “Configuring the Printer” later in this chapter.
Windows NT 4.X—to set up your printer for TCP/IP or AppleTalk,
continue to either “LPR Port Setup for TCP/IP” or “AppleTalk Setup
for EtherTalk” in chapter 5.
Configuring the Printer
If necessary, configure the printer’s communication interface using
the front panel.
1. Select the
SETUP:I/F
menu.