Xante PlateMaker 3, Руководство пользователя

Страница: 203 / 298

_______________________________________ Configuration 6-29
Paper Mode
The paper cassette media guides activate cams which notify the
printer of the paper size. Because some international and North
American paper sizes are very similar in size, the MISC:PAPER
MODE configuration menu specifies whether the cassette setting is
for North American paper sizes (US) or for International paper sizes
(Euro).
Power Save Feature
Power Save conserves power when the printer is not in use. When
enabled, the feature puts the printer into a low-power state after 30
minutes of inactivity.
Set Power Save from the MISC: POWER SAVE configuration
menu. Power Save is disabled (Off) as the default; On enables it.
Printer Timeout
The Timeout feature allows you to select the number of seconds the
printer waits for additional data before cancelling a job and returning
to the
READY/IDLE state.
Set Timeout from the MISC:TIMEOUT configuration menu. The
factory default of 40 seconds (40 Sec) is an average setting. Set
timeout according to the type of files you send. Use a low setting for
small, simple files to prevent an indefinite tie-up on one job. Use the
300 or Never setting for large files, such as graphic intensive or CAD
(Computer Aided Design) files, to allow enough time for processing.
With the NEVER selection the printer does not timeout; it waits until
it receives additional data or until the printer is reset.
RAM Disk
RAM Disk allows you to set aside a section of printer RAM to be
used as a read/write device for implementing XANTÉ’s Font
Accelerator.