Xante PlateMaker 3, Руководство пользователя

Страница: 145 / 298

_______________________________________ Ethernet Setup 5-5
5. Choose File: Quit to close Command Center.
6. Restart the Printer to make the new zone name effective.
Novell NetWare Configuration
The Ethernet upgrade allows your printer to support EtherTalk,
Novell NetWare print server, NetBEUI, and TCP/IP protocols
concurrently.
In a Novell network, users send print jobs to a queue on a server. The
print server monitors these queues and submits the jobs to the
appropriate network printer. Your printer can service multiple print
queues on up to four file servers.
The following steps are required to set up your XANTÉ printer on a
Novell network. Chapter 2 covers step 1, this section covers steps 2
through 4, and chapter 3 (Macintosh) or 4 (PC) covers step 5.
1. Connect your XANTÉ printer to the network through the
Ethernet port.
2. Configure the Novell server, assigning the print server (your
printer) access to specific queues.
3. Configure the print server emulation to direct your printer to
poll the appropriate Novell server(s).
4. Configure the Novell print server interface on your printer.
5. Install and configure the Adobe PostScript driver on the
individual workstations.