Xante PlateMaker 3, Руководство пользователя

Страница: 114 / 298

4-24 PC Setup bb __________________________________________
A hard disk must be initialized before it can be used to store
downloaded fonts or to set up a spooling queue. Initializing a disk
erases all information stored on that disk.
Novell34.ps prints instructions for setting up a XANTÉ printer on a
Novell network.
Parmdump.ps prints a list of current settings for the communication
devices configured for your printer.
Set_ip.ps allows you to set your printer’s IP address. Open the file in
a text editor and change the IP address in the parentheses to your
printer’s IP address. Save the file, and download it to your printer.
The printer must be restarted before the change is effective.
Setzone.ps allows you to set your printer’s EtherTalk zone namer.
Open the file in a text editor and change “name of zone” in the
parentheses to the name of your EtherTalk zone. Save the file, and
download it to your printer. The printer must be restarted before the
change is effective.
Startpg.off disables the printer’s start-up page feature, which
prevents it from printing automatically each time the printer is
restarted. See “Start-up Page” in chapter 6 for details.
Startpg.on enables the start-up page feature, which causes a page to
print automatically each time the printer is restarted. See “Start-up
Page” in chapter 6 for details.
Sysparm.ps prints a list of current system parameters.
XANTÉ Command Center
XANTÉ Command Center allows you to check and control many
printer functions from your PC. See “XANTÉ Utilities Installer” earlier
in this chapter for installation details.
The File and Help menus are similar to other Windows applications
and are not described in this section.