Xante PlateMaker 3, Руководство пользователя

Страница: 66 / 298

3-28 Macintosh Setup bb ____________________________________
Procedures
This section provides instructions for performing special procedures
using XANTÉ Command Center and Adobe Downloader.
Spooler
If your printer has an optional hard drive, you can use the spooler to
place print jobs into a queue on the hard drive. This reduces return to
application time by freeing the communications channel between the
computer and the printer. The Save Spooled Job feature allows you
to save up to 250 print jobs on the hard drive for reprinting later. See
“Spooler” in chapter 6 for details.
Spooling can be enabled independently through XANTÉ Command
Center or the printer’s front panel Interface menus. Command Center
also allows you to manage jobs in the spooler print queue.
Using the Front Panel
You can enable the Spooler using the Spooler menu for the interface.
See “Interface Control” in chapter 6 for details.
1. Select the Interface (
SETUP: I/F)
menu.
2. Select the printer interface (
SERIAL
,
PARALLEL
,
ETALK
,
LPR
,
NETBEUI
, or
NVL PSRV
) that you use to send files.
3. Select the Spool menu; then, select YES.
4. Press the On Line key to return the printer to the
READY/IDLE
state.
Using XANTÉ Command Center
This option allows you to enable and control spooling on the
printer’s hard drive.
To Enable the Spooler