Xante PlateMaker 3, Руководство пользователя

Страница: 71 / 298

_____________________________________ Macintosh Setup 3-33
Fig. 3.15 Linearization Window
2. Change the Linearization window LPI setting in the Print box
(fig. 3.15) to achieve 256 levels of gray for the resolution at
which you are printing.
Note: For 600 dpi, select 85 lpi; for 1200 dpi, select 106 lpi;
for 2400 dpi, select 133 to 150 lpi. Any lpi may be
used; measure the lpi that is to be used for final output.
3. Print a Calibration Page to measure the printer’s current
performance as a basis for the calibration. To do this use the
following procedure: