Xante PlateMaker 3, Руководство пользователя

Страница: 128 / 298

4-38 PC Setup bb __________________________________________
1. Click Enter Curve/Linearize. The Densitometer Data Entry
window appears (fig. 4.24).
Fig. 4.24 Densitometer Data Entry Window
2. Measure individual patches on the calibration page by placing
the page on a white background; then, center the
densitometer's lens over the patch and either click the black
button on top of the XD-1 or click the measure button on the
Densitometer Data Entry window (fig. 4.24). The
measurement appears in the box to the right of the Measure
button.
3. Make sure to enter the solid black (1) and solid white (2)
measurements first. Enter the number of the patch whose
densitometer measurement most closely matches (within
±
2%) the corresponding percentage in the enter the box numbers
section (3).
For example, when you are reading for 2%, if the box labeled 7
measures 2%, enter the number 7 in the corresponding box.