Xante PlateMaker 3, Руководство пользователя

Страница: 85 / 298

_____________________________________ Macintosh Setup 3-47
1. Open XANTÉ Command Center. Select General: Margin
Adjustment. The Printer Margin Control window (fig. 3.23)
appears.
Fig. 3.23 Printer Margin Control Window
2. Select Standard to use 1/32-inch units or Metric for 1 mm units
for adjustments.
3. Select Set & Print. Click Send to Printer. Click Ok in the
warning dialog box (fig. 3.24). An alignment test page prints.
Fig. 3.24 Margin Alignment Warning
4. Turn the test page so that -x is to the left and -y is at the top of
the crossed lines.