Xante PlateMaker 3, Руководство пользователя

Страница: 204 / 298

6-30 Configuration bb ______________________________________
Set RAM Disk from the MISC:RAM DISK configuration menu. 0,
the factory default, disables RAM disk. Options are in 1 MB
increments to the maximum available RAM, which is the installed
RAM minus 32 MB (the base amount of RAM required by the
system). The printer must be restarted for the RAM disk setting to
become active.
Resolution Options
Standard PlateMaker 3 configuration has 600 x 600 and 1200 x 1200
dpi, which can be upgraded to 2400 x 2400 dpi.
Note: See “Printer Memory Requirements” in chapter 9 for RAM
requirements to print at higher resolutions.
Set available resolutions using either the front panel MISC:DPI
configuration menu or your application’s Print dialog box.
If the resolution upgrade is installed and adequate RAM is available,
but the upgrade cannot be selected in your application Print dialog
box (it is grayed out), RAM may not be configured properly in the
PPD. See the section on configuring the PPD for your operating
system in chapter 3 (Macintosh) or 4 (PC).
Smooth Shading
Smooth Shading allows you to use the Adobe PostScript 3 method of
rendering gradient blends. Smooth Shading produces the highest
quality image at the selected resolution. For some images, the
PostScript files created with Smooth Shading are smaller and print
faster than those created using PostScript Level 2.
Set Smooth Shading from your application Print dialog box. Off, the
factory default, disables this feature. Options of Maximum, High,
Medium, and Low are available.