Xante PlateMaker 3, Руководство пользователя

Страница: 146 / 298

5-6 Ethernet Setup bb ______________________________________
Configure the Novell Server
Using a Novell utility, your Novell System Administrator sets up
and names the print servers and print queues on the Novell server.
This section covers selecting Novell names and then configuring for
Novell NetWare version 3.X, 4.X, or 5.X.
Selecting the Novell Names
Certain characters are invalid for use in Novell names (fig. 5.2). The
Novell utility automatically replaces any of these characters in the
printer’s default name with an underscore (_) character and changes
all characters in the name to uppercase.
space ( ) less-than sign (<)
double quote (") equals sign (=)
asterisk (*) greater-than sign (>)
plus sign (+) question mark (?)
comma (,) left bracket ([)
forward slash (/) backward slash (\)
colon (:) right bracket (])
semicolon (;) vertical bar (|)
Fig. 5.2 Invalid Characters for Novell NetWare Names
Your printer’s default Novell print server name appears on the
start-up page after the Ethernet board is installed. The default print
server name is formed by adding a _PS extension to your printer’s
PostScript name. The printer PostScript name PLATEMAKER 3
becomes the default print server name PLATEMAKER_3_PS.
The Novell System Administrator may assign a print server name
other than the default and may assign a password to control access to
the server.
Note: The print server name on the printer must match the
corresponding print server name on the Novell file server.
For example use xante_ps for both of these names. It also is
recommended that you name the Novell file server queue a
similar name such as xante_q.