Xante PlateMaker 3, Руководство пользователя

Страница: 109 / 298

___________________________________________ PC Setup 4-19
Windows 95 and 98—highlight the option in the Installable
Options section; then select the setting under Change Setting.
Windows NT 4.X—highlight the option in the top half of the
Device Settings window; then, select the setting in the bottom
half of the window.
Fig. 4.12 Device Options Tab
a. Select Installed for the Upper Optional Tray (first
optional paper feeder) if that upgrade was added to your
printer. Select Installed for the Lower Optional Tray
(second optional paper feeder) if that upgrade was
added.
b. Select True for Spooler Enabled to activate the Save
Spooled Job menu in your application Print dialog box if
your system has an optional internal hard disk.
Note: This does not enable the Spooler on your printer.
The Spooler must be enabled using either the front
panel Interface menus or XANTÉ Command
Center. See “Spooler” in chapter 6 and “Spooler”
later in this chapter for details.
c. Select the amount of RAM installed on your printer. For
Windows 95 and 98, use the VMOption and then go to
step 4. For Windows NT 4.X, use Installable
Options:InstalledMemory and then skip to step 8.