Xante PlateMaker 3, Руководство пользователя

Страница: 225 / 298

_______________________ Printing with Various Media Types 8-3
Introduction
This section covers computer-to-film, computer-to-plate, and
envelope printing. It also lists Myriad film and Myriad 2 plate sizes.
For additional information and troubleshooting procedures, see
chapters 2 and 11.
Computer-to-Film Printing
With Positive Film Technology and XANTÉ’s optional patented
NEIT, you can print directly to XANTÉ’s Myriad film to create an
image for burning metal plates and silk screen emulsions, bypassing
camera and darkroom steps.
Myriad film is a specially designed semitransparent film with low
UV blockage. The transmissive density of the toner on Myriad film
is increased from 1.5 or 1.6 up to 3.0 to 3.3 when processed through
FilmStar 2.
Always use the multipurpose feeder when printing film.
• Use only XANTÉ’s Myriad film, designed specifically for use
with your printer and FilmStar 2. Using other film material may
void your printer warranty.
• Avoid handling film excessively to prevent fingerprints and
scratches.
• Keep the printer clean (see chapter 9 for cleaning instructions).
• Load fewer sheets of film if jams occur.
• Remove each sheet as it prints to prevent static buildup.
• Do not fan film. This causes static buildup which can cause jams.
• Once an image is printed on Myriad Film, the toner side is the
emulsion side. For FilmStar 2 processing, film loads emulsion
side up.