Xante PlateMaker 3, Руководство пользователя

Страница: 207 / 298

_______________________________________ Configuration 6-33
Toner Cartridge Control
If your printer does not produce the rich, black images that you
expect, try redistributing the toner in the cartridge and adjusting the
print density before replacing the toner cartridge.
Redistributing Toner
If you have not used the toner cartridge in several days, toner may
have settled. Remove the cartridge from the printer, and shake the
cartridge gently to redistribute toner. Replace the cartridge in the
printer. See “Toner Cartridge” in chapter 2.
Adjusting Print Density
You can increase or decrease the amount of toner laid down by the
printer using the print density dial.
Note: The amount of toner used increases as printer dial settings
move from low (L) to high (H). Printing with too high a
setting shortens the life of the toner cartridge and may
degrade print quality.
To adjust the print density dial
1. Open the multipurpose feeder by grasping the handle in the top
center of the cover and pulling down (fig. 6.14).
Caution: The multipurpose feeder does not open to a 90
°
angle. To prevent damage to the feeder, do not
exert strong pressure or place heavy objects on it.