Xante PlateMaker 3, Руководство пользователя

Страница: 280 / 298

11-18 Troubleshooting bb ____________________________________
- Use an alcohol substitute, such as Varn
Laser Etch 1000, instead of alcohol.
Although you can use up to a 5% alcohol
solution with Myriad 2 plates, the alcohol
may cause premature ink breakdown.
- Check the alcohol or alcohol substitute to
water ratio. The ratio should be no greater
than 32:1. Add fountain solution to lower
the alcohol or alcohol substitute
percentage.
Spaces around characters in the text are being plugged after 50 to
100 impressions are run.
• This problem could be caused by an
incorrectly mixed wetting solution.
- Increase the fountain solution
concentration in the water mixture.
- Remix the fountain solution, using the
manufacturer’s suggested ratio.
• This problem could be caused by a problem
with the blanket.
- Check the plate to blanket pressure. The
stripe should be .125" (3 mm) across the
width of the plate.
- Clean the blanket with fountain solution to
remove alkaline residues from coated and
parchment stocks.
Mechanical Issues
This section provides tips for resolving problems with the printer’s
mechanical setup.