Xante PlateMaker 3, Руководство пользователя

Страница: 124 / 298

4-34 PC Setup bb __________________________________________
The XD-1 (XANTÉ densitometer), combined with XANTÉ
Command Center software, measures grayscale output for calibration
and proofing. This affordable, easy-to-use densitometer will be used
in this manual for example purposes.
Seven standard curves are supplied with XANTÉ’s Halftone
Calibration Technology, and you can create up to seven custom
gamma curves. You can select any of the custom or standard gamma
curves on a job by job basis using the front panel Gamma menu or
the Print dialog box Gamma PPD option. See “Halftone Calibration
Technology (Gamma)” in chapter 6 for details.
Custom curves are created using XANTÉ Command Center and a
densitometer using the following steps:
• Printing a Calibration Page
• Using the Densitometer
• Linearizing the Densitometer Data
Printing a Calibration Page
To begin calibrating your printer, print a calibration page to measure the
printer’s current performance as a basis for the calibration.