Xante PlateMaker 3, Руководство пользователя

Страница: 139 / 298

___________________________________________ PC Setup 4-49
• To move the -x line away from the edge of the page, move
the slide on the vertical slide bar up (toward the -y).
• To move the -x line toward the edge of the page, move the
slide on the vertical slide bar down (toward the +y).
6. Measure the distance from the edge of the page to the -y line.
This distance is dependent on the x coordinate.
• To move the -y line away from the edge of the page, move
the horizontal slide bar to the left (toward the -x).
• To move the -y line toward the edge of the page, move the
horizontal slide bar to the right (toward the +x).
7. Click Update/Print; then, click OK in the Alignment message
box to print another alignment page.
8. Measure the -x and -y lines on the new test page. If the lines
are not 1" (25.4 mm) from the edge of the paper, go back to
step 4 and repeat the process.
9. When the -x and -y lines are set correctly, click Close. Then,
select File: Exit to close Command Center.
Managing Fonts on an Optional Hard Disk
Fonts downloaded to your printer are considered resident, which
means applications do not have to bundle these fonts with print jobs.
You can download additional fonts to the printer’s memory or to an
optional hard disk. Fonts downloaded to printer memory remain only
through the current power cycle. Fonts downloaded to an optional
hard disk survive a power cycle.
Caution: Fonts downloaded to memory may cause PostScript
errors due to insufficient memory. To solve this,
download the fonts to the printer’s optional hard disk or
increase printer memory.
To remove all downloaded fonts from printer memory, turn the
printer off and then back on.