Xante PlateMaker 3, Руководство пользователя

Страница: 274 / 298

11-12 Troubleshooting bb ____________________________________
The toner on the printed media smears when rubbed.
• Media may be damp or otherwise damaged.
Make sure media meets the requirements in
“Media Specifications” in chapter 7. If
necessary, replace the media. See “Paper
Cassette” and “Multipurpose Feeder” in
chapter 2.
• The fuser may not be working properly. The
printer displays the E: FUSER status message
if there is a hardware problem with the fuser.
Instead of my image (or text), the output is a blank page.
• The sealing tape may not be pulled out of the
toner cartridge. Remove the cartridge and pull
out the tape. See “Toner Cartridge” in chapter
2.
• The printer may feed two or more sheets of
media at a time. Reduce the size of the media
stack. See “Paper Cassette” and “Multipurpose
Feeder” in chapter 2.
• The density setting may need adjustment. See
“Adjusting Print Density” in chapter 6.
• The toner cartridge may need replacing. See
“Toner Cartridge” in chapter 2.
Instead of my image (or text), the output is a solid black page.
• The density setting may need adjustment. See
“Adjusting Print Density” in chapter 6.
• The toner cartridge may need replacing. See
“Toner Cartridge” in chapter 2.