Xante PlateMaker 3, Руководство пользователя

Страница: 134 / 298

4-44 PC Setup bb __________________________________________
8. Repeat steps 5 and 6 until the line measurements agree with
the lengths listed on the test page.
9. Press the On Line key when the line lengths are correct.
READY/IDLE appears in the window.
Now the printer’s line lengths are calibrated correctly.
Command Center X-ACT
Use XANTÉ Command Center’s X-ACT feature to calibrate printer
line lengths and correct inaccuracies in printing width, height, skew,
and angle.
Note: You must have Command Center and your printer’s current
PPD installed before you can use Command Center’s X-
ACT. You also will need a 1/2 millimeter ruler.
1. Open XANTÉ Command Center and select Controller: More
X-ACT. The More X-ACT window appears (fig. 4.27).
Fig. 4.27 More X-ACT Window
2. Make sure that the same type of media you will use for final
printing is loaded in the printer.