Xante PlateMaker 3, Руководство пользователя

Страница: 206 / 298

6-32 Configuration bb ______________________________________
To use Save Spooled Job, the spooler must be enabled on the printer
port you are using, the spooler option must be configured in the PPD,
and the printer must have a hard disk attached. Set Save Spooled Job
from your application Print dialog box. True enables this feature and
False disables it.
Control spooling to each printer interface independently using either
the Interface configuration menus or XANTÉ Command Center. See
chapter 3 (Macintosh) or 4 (PC) for details on configuring the PPD
and using the spooler. See “Interface Control” earlier in this chapter
for information about configuring the spooler on the printer’s port.
Start-up Page
The Start-up Page feature prints a page that lists the selected resolution,
installed RAM, hard disk identities, page count, enabled interfaces, and
network information (if the Ethernet upgrade is installed) each time the
printer is turned on.
Set Start-up Page from the MISC:STRTUP PAGE configuration
menu, from XANTÉ Command Center on a Macintosh, or by
downloading Adobe PostScript files to the printer. In the
MISC:STRTUP Page configuration menu, Yes (the factory default)
enables the feature; No disables it. In XANTÉ’s Macintosh
Command Center, the General:Startup Page menu allows you to turn
the Start-up Page feature on and off or to print a start-up page on
demand.
The XANTÉ Utilities CD-ROM contains the PostScript files
Startpg.on and Startpg.off. Download these files to the printer to
enable (Startpg.on) or disable (Startpg.off) the feature. See
“Downloads Folder” in chapter 3 (Macintosh) and “PS_Files Folder”
in chapter 4 (PC) for instructions.
To print a start-up page manually, take the printer offline and press
the Test control key. After the start-up page prints, press the Online
key to put the printer back online.