manualshive.com logo in svg

Rohde & Schwarz SMBV100B, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMBV100B Скачать руководство пользователя страница 951

Troubleshooting and Error Messages

R&S

®

SMBV100B

949

User Manual 1178.4460.02 ─ 03

To open the dialog, in the "Info" line select the "Info" button.

● The "Static Errors" dialog lists the last monitored messages chronologically and

displays additional information on the highlighted message.

● The "Error History" dialog lists the accumulated messages with a short descrip-

tion.
Volatile errors are reported once, at the time they appear. If identical errors
occur subsequently, they are not reported repeatedly.
In the "Info" line, identical errors are displayed repeatedly only if the original
error has already disappeared from the display. If queried by SCPI command,
identical errors are only reported if the original error has already been retrieved
from (and hence not any more present in) the error queue.

Indication and handling of permanent messages

If any critical error occurs, the R&S

 

SMBV100B automatically shows the   icon in the

taskbar. Select the icon to obtain information on the error and the number of occurren-
ces.
The icon is assigned to permanent messages. The message and icon are displayed
until the error is eliminated.

Querying Error Messages

Содержание SMBV100B







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды