Remote Control Commands
R&S
®
SMBV100B
751
User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete
<Filename>
Deletes the specified waveform file. If the file is not on the default path, the path must
be specified at the same time. The file extension may be omitted. Only files with the file
extension
*.wv
are deleted.
Setting parameters:
<Filename>
string
Example:
See
Example "Managing waveform files"
Usage:
Setting only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:FREE?
Queries the free disk space on the default path of the instrument's hard disk.
Return values:
<Free>
integer
Range:
0 to INT_MAX
*RST:
1
Example:
See
Example "Managing waveform files"
Usage:
Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:POINts?
Queries the number of samples (the number of I/Q values pairs) in the selected wave-
form file.
Return values:
<Points>
<waveform filename>
Range:
0 to 1000
*RST:
1
Example:
Example "Managing waveform files"
Usage:
Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA
<Filename>, <Data>
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA?
<Tag>
The
setting
command writes the binary block data
<data>
to the file identified by
<filename>
. The
complete content
of the waveform file (i.e. including all tags) must
be specified; the complete content is transmitted as binary data block.
I/Q data and the marker data can also be written to a file with the command
.
Tip:
To ensure trouble-free data transmission, set the GPIB delimiter to EOI.
The
query
command retrieves the content of the specified tag of the currently selected
waveform file or the waveform file specified with the
<filename>
.
SOURce Subsystem
