manualshive.com logo in svg

Rohde & Schwarz SMBV100B, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMBV100B Скачать руководство пользователя страница 147

Configuring the Internal Baseband Source

R&S

®

SMBV100B

145

User Manual 1178.4460.02 ─ 03

Lowpass ACP optimization

Lowpass EVM optimization

EUTRA/LTE

3.6

 

Using the Arbitrary Waveform Generator (ARB)

The Arbitrary Waveform Generator (ARB) is an I/Q modulation source forming part of
the R&S

 

SMBV100B. The ARB allows the playback and output of any externally calcu-

lated modulation signals in the form of waveform files. The ARB can also generate
multi-carrier or multi-segment signals from the waveform files.

3.6.1

 

Required Options

The equipment layout for processing of waveform files includes:

●

Base unit, incl. arbitrary waveform generator

●

Corresponding digital standard option (R&S

 

SMBVB-K2xx/K4xx)

Required to process a waveform file generated by the signal generation software
R&S

 

WinIQSIM2.

For example, if you purchase option Digital Standard EUTRA/LTE R&S

 

SMBVB-

K255, you can process EUTRA/LTE waveform files generated by R&S

 

WinIQSIM2.

●

Corresponding R&S

®

Pulse Sequencer option

●

Optional, ARB memory extension (R&S

 

SMBVB-K511/-K512/-K513)

Depending on the connectors at that the waveform is output, the following options are
required:

●

Output at the RF connector requires suitable RF frequency option (R&S

 

SMBVB-

B103/KB106)

3.6.2

 

About the ARB

This section provides background information on the ARB functionality and the impact
of the provided settings.

Using the Arbitrary Waveform Generator (ARB)

Содержание SMBV100B







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды